»cdrecordでCDを焼くはてなブックマークに追加はてなブックマークを見る

cdrecordを使えばコマンドライン上でも簡単にCDを焼くことができる。

⇑

»準備

まず、使用する光学ドライブを指定するための情報を確認する。 ここでは、ATAPI(IDE)接続のデバイスのみを表示させる。

$ cdrecord -scanbus dev=ATAPI

上記のコマンドを実行するとこのような結果が得られる。

Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Use of ATA is preferred over ATAPI.
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
scsibus0:
        0,0,0     0) 'PIONEER ' 'DVD-RW  DVR-106D' '1.06' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

使用したマシンではPioneer製のDVD-RWドライブが1台のみ接続されているので、それが表示されている。 この「1,0,0」の番号がふられている光学ドライブを用いてCDを焼くことにする。

⇑

»ISOイメージを書き込む

コマンドは以下のとおり。

$ cdrecord -v -eject speed=16 dev=ATAPI:1,0,0 test_image.iso

それぞれのオプションの意味は次のとおり。

実行すると下記のようになる。

cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:1,0,0'
devname: 'ATAPI'
scsibus: 1 target: 0 lun: 0
Use of ATA is preferred over ATAPI.
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-106D'
Revision       : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   698 MB
Total size:      802 MB (79:27.69) = 357577 sectors
Lout start:      802 MB (79:29/52) = 357577 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11849 (97:24/01)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 25
Manufacturer: Taiyo Yuden Company Limited
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 2270
Speed set to 2822 KB/s
Starting to write CD/DVD at speed  16.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01:  698 of  698 MB written (fifo 100%) [buf  79%]  14.4x.
Track 01: Total bytes read/written: 732313600/732313600 (357575 sectors).
Writing  time:  308.368s
Average write speed  15.8x.
Min drive buffer fill was 77%
Fixating...
Fixating time:   19.575s
cdrecord: fifo had 11535 puts and 11535 gets.
cdrecord: fifo was 0 times empty and 3792 times full, min fill was 89%.

書き込みが終わると、-ejectオプションにより自動的にCDが排出される。

⇑

»オーディオCDとして書き込む

オーディオCDとして書き込む場合は、-audioオプションを使用する。

cdrecord -v speed=4 dev=ATAPI:1,0,0 -audio track*.wav

Sponsored Link
⇑